Megger EGIL, Руководство пользователя

Страница: 47 / 72

9]
Remove the ground connections from one
side of the breaker as shown in the picture
below.
close coil
+
trip coil
EGIL
Programma
battery battery
_
main
supply
yellow/green
earth
_
black
+
black
red
yellow
blue
red
Important
When only one side of the breaker is
grounded while making the test, special
precautions must be observed to protect
service personnel and the test equipment
from harmful voltages.
10]
Turn EGIL power switch on.
EGIL is now ready to operate.
8.2 Setting parameters
EGIL reads the status of the breaker (closed or open).
The built-in sequence module is automatically set to
the next logical single operation.
If multiple operation is requested, perform the follow-
ing steps:
1]
Select a sequence operation from the SE-
QUENCE menu by pressing the arrow-keys. 2.
2]
Press ENTER to set pulse delay times and
pulse length values if needed and press EN-
TER to confirm your settings.
For more information about parameters, see Chapter
6 (Menu options and parameter settings).
BM0087OE ZP-BM01E EGIL 47
8 HOW TO MAkE A TIME MEASUREMENT