PAGE 6 OF 12
MANUAL CONTROL WITH REMOTE/HANDHELD
MANUAL CONTROL WITH REMOTE/HANDHELD
You can use the remote to initiate manual movement, switch on and off wire heating or switch
between the front and side trolleys (bear in mind only one set of wires may be actively heating at
any given time). You can also use the remote to adjust the cutting parameters on-the-fly while a cut
is in progress (heat and speed). The remote features a display showing current wire co-ordinates
(front or side), current wire heating value as well as current speed.
Buttons’ description:
Straight Wire
Heating OFF
Turn off the heating of the currently selected set of
wires
Straight Wire
Heating ON
Turn on the heating of the currently selected set of
wires
