megapixall MPIX-IP1MPIR30, Быстрый старт

Страница: 10 / 20

6
2 Device Installation
This series camera support two installation modes: wall mount and pendant mount. See Figure 2-1
and Figure 2-2.
Important
Please make sure the installation surface can min support the 3X weight of the camera and the
bracket.
Step 1
Paste the installation positioning map on the installation surface such as wall, ceiling or the wood.
Step 2
Dig holes in the installation surface according to the installation positioning map.
Step 3
Insert the expansion bolts from the accessories bag to the holes you just dug. If it is the wood surface
you can skip to the next step.
Step 4
Use the screws from the accessories bag to secure the device firmly.
Step 5
Connect the cable and then boot up the device.
Step 6
Loosen the adjust knob for a little bit, adjust the camera to proper surveillance position according to
your actual requirements.
Step 7
Secure the knob of the bracket to fix the camera.
Figure 2-1