MEEPO MINI DUAL, Руководство пользователя

Страница: 13 / 20

13 Remove the Battery Pack
14 Replace the Battery Pack
• Ensure that the board is turned off.
• Take the grip tape off.
• Use a 3mm hex wrench to remove the six bolts that fasten the
battery pack to the deck.
• Lift the battery pack to reveal the connector between the deck and
battery pack.
• Carefully twist and pull the connector apart.
• To insert a new battery pack, align the grooves on both ends of the
connector (board & battery pack).
• Insert, connect, and adjust the two ends of the connector together.
Make sure to tighten the connector to make a good seal.
• Ensure the connector lays flat within the accessory wire and the
groove of the board.
• Replace and tighten the bolts with the hex wrench, and put the grip
tape back on.