Meec tools 721-205, Руководство по эксплуатации

Страница: 34 / 36

ENGLISH
34
OPERATION
Use
The machine is only intended for hobby use.
WARNING:

Make sure to keep the power cord and extension cord away from the rotating blades
– risk of electric
shock.

The machine must be connected to the mains supply with a residual current device with a maximum
tripping current of 30 mA.

Only use extension cords approved for outdoor use, otherwise there is a risk of electric shock.
1. Connect an extension cord to the machine. The
extension cord must not be longer than 50
metres, and must have a wire cross section area
of at least 1.5 mm².
2. Keep your hands and the rest of your body away from the moving parts of the machine. Keep
onlookers at a safe distance.
3. Place the machine at the edge of the area to be worked. Start the machine and run it carefully
forwards.
4. Start the machine by pressing in the button (A) and pulling the lever (B) towards the handle. Keep
the lever pressed in and release the button to start the rotating blades.
5. When you reach the far edge of the area being worked, carefully turn round and go back. Overlap
the first run by a few centimetres.
6. Stop the machine by releasing the lever (B).
7. Clean the machine carefully every time it has been used.