Turn off the water supply
to the to the toilet
Then flush the toilet.
Use a plunger and a
sponge to get the water
out of the bowl
Using a bucket, unhook
the water supply and
drain the remaining
water from the toilet’s
tank.
Remove the existing
closet bolts from the
toilet.
Remove the existing
toilet.
Remove the old wax ring
and closet bolts
Slide in the new extend-
ed 6 inch closet bolts in
the existing flange
Place one of the wax
rings provided in the kit
on top of the flange
Carefully install the
toilet riser over the
closet bolts
Apply pressure to the top
of the Riser to properly
seal the wax ring with
the existing floor flange
Place the second wax
ring on to the riser flange
(optional step) if you ordered the
Medway 19” Easy Toilet Riser
Place the 19” riser apron
over the base riser and
adjust as necessary to
accomodate your toilet
Reinstall the toilet on top
of the toilet riser
Apply pressure on the
bowl to properly seat the
toilet.
Install nuts and washers
Do not over tighten
Install the new water
supply line and turn on
the water
Congratulations! You can
now use your new raised
toilet!
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
Step 12
Step 13
Step 14
Step 15
Step 16
Step 17
Step 18
Step 19
Remove your Existing Toilet
Install the Easy Toilet Riser
Re-install your old Toilet
The Medway Easy Toilet Riser can normally
be installed in less than an hour by most
handy persons.
