manualshive.com logo in svg

Medtronic PROTECTA XT DR D314DRG, Руководство для клиницистов

Поделиться
Скачать
Medtronic PROTECTA XT DR D314DRG Скачать руководство пользователя страница 434

5. Observe the Live Rhythm Monitor for an intrinsic rhythm. If consistent pacing is still

occurring, decrease the Lower Rate.

6. If necessary, abort the test by selecting [STOP and Restore]. The temporary pacing

settings of Mode, AV Delay, and Lower Rate return to the programmed values.

After the Sensing Test is complete, the measurement results are saved and displayed on

the test screen.
To compare the Sensing Test measurements with the automatic daily sensing amplitude

measurements, select the P/R Wave Amplitude Trends [>>] button.
Select the [Print] button to print the test results.

10.6  Testing the device capacitors

The Charge/Dump Test allows you to test the charge time of the capacitors, manually form

the device capacitors, and dump any charge remaining on the capacitors. After the

capacitors are charged, the charge remains on the capacitors until the charge is dumped,

delivered by a cardioversion or defibrillation therapy, or allowed to dissipate for at least

10 min. The Charge/Dump Test screen displays the date, time, charge time, and energy

values for the last time the device capacitors were charged to full energy (from any starting

energy value). It also displays the date and time of the last capacitor formation.

Note: Manually forming the capacitors resets the automatic capacitor formation interval and

optimizes charge time. For more information about the Automatic Capacitor Formation

feature, see Section 9.9, “Optimizing charge time with Automatic Capacitor Formation”,

page 421.

Note: Tachyarrhythmia detection is suspended during the Charge portion of the

Charge/Dump Test.

10.6.1  How to perform a Charge/Dump Test

Medtronic

PROTECTA™ XT DR D314DRG

434

Clinician Manual

Содержание PROTECTA XT DR D314DRG





























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды