manualshive.com logo in svg

Medtronic PROTECTA XT DR D314DRG, Руководство для клиницистов

Поделиться
Скачать
Medtronic PROTECTA XT DR D314DRG Скачать руководство пользователя страница 154

Heart rate variability – Reduced variability in the patient’s heart rate may help you to

identify heart failure decompensation. The device measures each atrial interval and

calculates the median atrial interval every 5 min. It then calculates and plots a variability

value (in ms) for each day.

Note: The heart rate variability calculation does not include events that occur during

arrhythmia episodes.
OptiVol 2.0 Fluid Index – A decrease in intrathoracic impedance may be an early indicator

of fluid accumulation associated with heart failure. The OptiVol 2.0 Fluid Index trend displays

the accumulated difference between the measured daily thoracic impedance and the

Reference Impedance, adjusted for individual patient variation. If the Daily Impedance is

less than the Reference Impedance, this may indicate that the patient’s thoracic fluid has

increased. The horizontal line shows the programmed value of the OptiVol threshold.

Caution: Verify lead integrity when evaluating the OptiVol 2.0 Fluid Index trend. Loss of

RVcoil integrity due to lead fracture or insulation defect may adversely affect the results of

the OptiVol 2.0 Fluid Index trend.

Note: The OptiVol Fluid Status Monitoring feature has been updated to OptiVol 2.0 to

account for individual patient variation, including allowing the Fluid Index to increase or

decrease based on recent intrathoracic impedance measurements.
For more information, see Section 6.7, “Monitoring for thoracic fluid accumulation with

OptiVol”, page 161.

Note: The OptiVol fluid monitoring feature provides an additional source of information for

patient management and does not replace assessments that are part of standard clinical

practice.
Thoracic impedance – The Thoracic impedance trend allows you to compare the daily

average measured thoracic impedance to the Reference Impedance values. The Reference

Impedance changes slightly from day to day, to slowly adapt to the Daily Impedance.

6.6  Viewing heart failure management information

An analysis of clinical information related to heart failure can help you to follow changes in

a patient’s condition and correlate these changes with variations in device programming,

medication, patient activity, or symptoms.

Medtronic

PROTECTA™ XT DR D314DRG

154

Clinician Manual

Содержание PROTECTA XT DR D314DRG





























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды