Medoc TSA 2001, Техническое справочное руководство

Страница: 49 / 188

Q-Sense Technical Reference Manual
Proprietary 49 of 188
6 Test Procedure and Management
Starting a test procedure is only possible from the Test Navigator screen
Figure 19: Test Management Main Screen
The stimulation procedure (test) consists of the following main steps:
 Select Patient – Select the tested subject’s file from the database.
 Select Program – Select the relevant program that will be used for the test.
 Select Body Site – Select the body site and its details for the current test. This step is
optional.
 Go to Test and Apply Stimuli – Perform the test
 Save/Print Test Results –Print test report and/or save test data for future reference
(This step is optional).
Make sure you are familiar with the stimulation method before you start
with the test procedure
Inform the subjects how to operate the applicable controls, and request
them to concentrate on the perceived sensations throughout the full
duration of the test.
The stimulation procedure steps are described in detail in the following sections.
6.1 Selecting a Patient
1. Click the Select Patient button on the Test Navigator
2. Use the Search Row (see section 5.4.3 above) to filter and sort list in order to find the
relevant patient entry.
Test tab
highlighted
Test
Navigator