Medline MDS86825DLX3, Руководство пользователя

Страница: 14 / 36

MDS86825DLX3/4 (GPI171)
Revised (A): 11/26/12
Cup Holder Assembly
1. Make sure you have all the necessary pieces.
2. Snap U-shaped clamp onto the tubing of your rolling walker.
(see Figure A) .
Note: Be sure the clamp is positioned in such a way that
it allows the cup to sit level, NOT tilted in a direction
that might allow your drink to spill (see Figure B) .
3. Remove the star-shaped knob from the cup holder, insert
holder through the opening in the clamp. Tighten the knob to
assure that the cup holder stays tightly attached
(see Figures C and D) . (Important: Hand Tighten Only!)
Note: If necessary, insert a rubber
sleeve in the clamp to better fit the
size of the tubing. Whether you use
a sleeve or not, the clamp should fit
tightly onto the tubing, otherwise the
cup holder is susceptible to slipping
and spilling your drink, which may
cause injuries.
Cup Holder with Star Knob U-Shaped Clamp
Figure C
Figure A
Figure D
Figure B
Cup
Holder
2 Scored Rubber Sleeves
(Optional)
14