Page 16 of 34
www.meditouch.co.il
Tel: (972)-9-8637477
Fax: (972)-9-8852935
45 Hamelacha, Poleg industrial zone, Netanya, Israel.
Zip: 4250574, PO Box: 8306
DO-15-01-12
BalanceTutor service manual 211102.doc
6.3 Mechanical noises from front motor transmission
6.3.1 Case 1 - Timing belt tightness
Indication
Tightness of the timing belt is too loose or tight. Approximately more or
less then ±0.5cm when you pull and push the belt to its vertical axis.
Corrective actions
(1)
Release a little bit the two bolts (of each side of the motor house)
(2)
Adjust timing belt to have a ripple of no more than ±0.5cm of its
horizontal axis.
Make sure that the motor house parallel to front frame bar.
After tension confirmation tight, the bolts back.
Handling with rotation parts. Service with power off and disconnection from main. Risk
harming fingers. Use appropriate tools.
