Meditech C-Scan, Руководство пользователя

Страница: 55 / 89

44
9.2 Distance measurement
Length measurement: select the "length", the current state is red, the finger touches
the screen and trigger a yellow solid dot above the finger, move the finger and the dot will
follow until stopping at the specified coordinate point; touch the screen again, another dot
will appear and move until stopping at another specified coordinate point to form a
measurement line and mark the distance. Maximum 4 length distance lines can be formed.
Undo function: When problems occur during the measurement, the user can undo the
operation, when you choose to cancel undo the last measurement, click the undo
button .
9.3 Enlargement and Translation
The image area receives a two-point touch for the enlarge translation operation. As
shown below, the lower right corner will show the magnification and translation of the
coordinates. The maximum enlargement is 2 times.