Meditech C-Scan, Руководство пользователя

Страница: 20 / 89

9
2) During operation, avoid long periods of repetitive operations,
regular breaks to relax the muscles.
3) Do not force the probe too hard to avoid the operation in an
uncomfortable posture caused by the operator hand, wrist or arm
fatigue.
1.7 Safety of the Probe

If the probe falls or collides with the object, do not use the probe until the
electrical leakage test confirms that the electrical safety is not impaired.

Do not immerse the entire probe in the liquid to clean it. Since the probe
plug does not have a waterproof function, this may cause an electric
shock or malfunction of the probe.

Using the probe with caution, damage to the probe may increase the risk
of electric shock. Always check for cracks or openings on the shell of the
probe, whether there are holes inside or around the sound lens, or other
damage to allow water to flow into the probe.

If the contact surface of the probe is scratched, immediately stop using
the probe and contact your sales office or dealer. If you use a scratched
probe, there is a risk of electric shock.

Avoid bending or twisting the probe cable so that it will not crack or
damage the probe shell, or that the electrical performance of the probe
will be affected by the breakage or exposure of the cable.