P3V Veterinary Digital Ultrasonic Diagnostic Imaging System User Manual
- 57
-
3.
Press
Del
to delete the created comment.
4.
Press
OK
to save the modification, or press
Cancel
to give up and close the dialog box.
5.7.6. Factory Default
In preset menu, move the cursor to highlight
Factory Default
and press
Set
, a dialog of “Restore
the Data” pops up, select
Yes
to restore the data or select
No
to cancel the operation.
5.7.7. Presetting DICOM
If you have installed the DICOM software, perform the DICOM presetting as shown below.
Figure 5-22 DICOM Presetting
Item
Description
System AE Title
The same as the title set in the
AE Title
of
Local
Institution Name
Set the name of the institution
Local
AE Title
Set the local AE title
Host Name
Set the local host name
IP Address
Set the local IP address
Port
Set the local port
Alias
Set the alias of the local system
Package
Size
Set the PDU transmission package size, from 4K to 64K, and the
default value is
16K
.
Server 1/2
AE Title
Set the server AE title, the same as the
System AE Title
displays
Host Name
Set the server host name
IP Address
Set the server IP address
Port
Set the server port
