Satellite Setup
SIGNAL QUALITY
The signal quality is shown in per cent. Settings here cannot be
changed.
SIGNAL LEVEL
The signal strength is shown in per cent. Settings here cannot be
changed.
Under
CHANNEL SCAN
, select
SCAN
and press
OK
or
.
Under
DVBS SCAN CONFIGURE
, you can specify the
SCAN MODE
and the
CHANNELS
to search.
Select the following options:
SCAN MODE
COMPLETE
: A full search will be run on the selected satellite. This will
also take into account new transponders that have not been added
to the transponders list. Two searches are performed during a com-
plete search. The first search identifies the satellite’s transponders.
The second search locates the channels. The complete search takes
the longest.
NETWORK
: Activate/deactivate the network scan.
CHANNELS
Decide which channels you want to search for:
FREE
(free channels),
ONLY ENCRYPTED CHANNELS
(encrypted channels) or
ALL
(free and
encrypted channels).
Press
OK
or
to start the search
If you do not want to set up any TV channels, select
SCIP SCAN
and press the
OK
or
button.
Once the search is complete, confirm
FINISH
with
OK
.
Then accept or skip the information on manufacturer use and diagnosis for transferring your
user data to the device manufacturer. This enables the manufacturer to ensure optimally func-
tionality of the device.
Setup is now complete and the device switches to Internet mode automatically. Press the
EXIT
or
button to switch back to TV mode.
The TV can be reconfigured at any time. To do so, use the
RESET
option in the
SET
TINGS > DEVICE PREFERENCES
menu.
14
MD32300-2 DE eCom QSG 30031292_299_334 RC.indb 14
MD32300-2 DE eCom QSG 30031292_299_334 RC.indb 14
15.02.2021 13:17:23
15.02.2021 13:17:23
