+49 8142 448 460
[email protected]
www.medingmbh.com
15 von 36
medin Medical Innovations GmbH
Adam-Geisler-Str. 1
D-82140 Olching
OP_medinSINDI EN
Rev 14 Stand 30.10.2017
Warning
The nasal cannulas to be used may not exceed a stagnation pressure of 80 mbar during use!
4.
Operation
The device should not be connected to a patient during set-up and system start. In addition, during set-up,
system start and operation, the user should not simultaneously touch the patient and the device. This applies
above all to the power supply, the alarm or RS232 Interface and the accessible metal parts of the pneumatic
unit (gas connections).
The adapter should not be used if it has visible damage to the housing or cord.
4.1.
Operating Controls
Figure 4: medinSINDI
®
front
Operating Controls
A.
"ON" soft-press button
B.
"OFF" soft-press button
C.
Adjustment knob for FiO
2
D.
Adjustment knob for amount of outgoing flow
E.
Soft-press buttons for alarm adjustment (see chapter 4.3.4 and chapter 5)
F.
Monitor with integrated 96 x 61 mm LCD display, resolution 240 x 128 dots b/w, including
illumination
G.
Display for amount of driving flow
