MEDICINE SAFE | 610 RTE 206 SUITE 26-416 | HILLSBOROUGH, NJ | 08844 | MEDICINESAFE.COM
MEDICATION DRAWER SAFE
(MDS-‐2C)
Setting the Combination Lock
Your Medication Drawer Safe has been set with a default security code of (0-‐0-‐0) from the factory. You
may keep this code, however, for added security, we recommend that you re-‐set the combination using
3-‐digits of your choosing by the following instructions below:
Step #1
Set the 3-‐digit combination wheels (Figure #1) to the factory default position 0-‐0-‐0.
Step #2
Open the safe by turning the locking knob clockwise.
Step #3
On the side of the lock, you’ll see there is a hole. Insert an object, like a paperclip, into
the hole. (Figure #2)
Step #4
While the object is inserted into the hole, choose your desired 3-‐digit security code.
NOTE:
When changing the combination, please make sure that all 3 digits are in the
same horizontal position.
Step #5
When your desired security code has been set, remove the inserted object from the
hole. Your security code is now set.
NOTE:
Please make a note of your personal combination and keep it at a safe place!
Locking Your Safe
To lock your safe, simply close the lid and turn the locking knob counter clockwise then change the code
randomly. The box is now locked.
WARNING:
Do not lock your critical or lifesaving medication inside as access may be denied if you have lost or
forgotten your custom code. Once the custom code has been established, the factory default code will
no longer work.
!"#$%&'()
!"#$%&'(*
+",&'-./&'0.%'1-23#"3#'4&1$%"56'1.,&
734&%5'.89&15'"35.'4",&'-./&'5.'1-23#&'4&1$%"56'1.,&
