Medias Mediatrix 1204, Справочное руководство

Страница: 61 / 390

Network Settings Reference Manual (SIP Version)
Mediatrix 1204 35
2. Click Submit if you do not need to set other parameters.
Network Settings
The Network Settings sub-page of the Management page allows you to configure network-related parameters
of the Mediatrix 1204 grouped in three categories:
Ethernet
Network Settings
SNTP
Ethernet Connection Speed
You can set the speed of the Mediatrix 1204’s Ethernet connection.
You can also set this parameter via SNMP, as described in “Ethernet Connection Speed” on page 135 .
X
To set the Ethernet connection speed:
1. In the web interface, click the Management link, then the Network Settings sub-link.
Figure 16: Management – Network Settings Web Page
2. Set the Ethernet connection speed of the Ethernet connector in the Network Port Speed field.
The following values are available:
• Auto detect
• 10Mbs-HalfDuplex
• 100Mbs-HalfDuplex
• 10Mbs-FullDuplex
• 100Mbs-FullDuplex
unlock Calls can be initiated.
lock Active calls in progress remain established until normal call termination.
No new calls may be initiated.
forcelock All active calls in progress are terminated immediately. No new calls may
be initiated.
Table 24: Temporary Lock Settings (Continued)
Setting Description
2