Medias Mediatrix 1204, Справочное руководство

Страница: 37 / 390

Choosing a Suitable Installation Site Reference Manual (SIP Version)
Mediatrix 1204 11
Figure 5: Wall-Mounting Pieces
Table 8 describes the wall-mounting pieces illustrated in Figure 5 .
9. Insert the four screws into the screw holes, and then tighten.
10. Place the wall-mounting bracket on the wall and place the screw holes of the wall-mounting bracket
over the screws installed in step 4.
11. Proceed to “Hardware Connection” on page 12 .
Stacking Units
For free-standing Mediatrix 1204 units, you can stack up to four units on top of each other. If you are mixing a
variety of hub units, position the smaller units at the top.
X
To stack units:
1. Use the supplied rubber feet by inserting them into the tabs on either sides of the Mediatrix 1204.
2. Place the Mediatrix 1204 units on top of each other.
3. Be sure that the feet of the upper unit line up with the recesses of the lower unit.
Table 8: Wall-Mounting Pieces
Item Qty. Description
A 1 Mediatrix 1204 casing
B 4 6 x 32 UNC 1/2 steel philips binding head screws
C 1 Wall-mounting bracket
D 4 6 bolt size split lock washers
E 4 6 x 32 5/16 across 7/64 thick steel Hex machine screw nuts
E
D
C
B
A
Note:
Ensure that the Mediatrix 1204’s front faces the sides or the top. Do not position the front of the
Mediatrix 1204 downward . If the Mediatrix 1204’s front faces downwards, the wall-mounting bracket is not
installed properly. See step 3.
Caution:
Stacking more than four units on top of the other may overheat the Mediatrix 1204.