Chapter 21 - Digit Maps
Setting up Digit Maps
246
Mediatrix 1204
Validating a Digit Map
The Mediatrix 1204 validates the digit map as you are entering it and it forbids any invalid value.
Setting up Digit Maps
The variables related to the digit maps are located in tables. You can create/edit ten digit maps for each
Mediatrix 1204. Before changing a parameter value, build its corresponding table with your MIB browser’s
table functionality. Depending on the MIB browser you are using, the tables may not appear the same way.
Digit map rules are checked sequentially. If a telephone number potentially matches two of the rules, the first
rule encountered is applied.
Each of these digit map rules has six specific variables to define for the digit map to work properly.
X
To set up digit maps:
1.
In the
digitMapMIB
, define the digit map string that is considered valid when dialed in the
digitMapAllowedDigitMap
variable.
The string must use the syntax described in
. The string format is validated
upon entry. Invalid entries are refused. The default value is
x.T
.
2.
Define the amount of digits to remove from the beginning of the dialed number, after dialing, but
before initiating the call, in the
digitMapPrefixedDigitRemovalCount
variable.
For instance, when dialing “1-819-xxx-xxxx”, specifying a value of “4” means that the call is started
by using the number “xxx-xxxx”. The default value is
0
.
This rule is applied BEFORE applying both
digitMapSuffixStringToRemove
(Step 3) and
digitMapPrependedString
(Step 4).
3.
Define the string to look for and remove, from the end of the dialed number, in the
digitMapSuffixStringToRemove
variable.
This is helpful if one of the digit maps contains a terminating character that must not be dialed.
For instance, let’s take a digit map such as “25#”, in which the “#” signals that the user has finished
entering digits. If you want to remove the “#”, specify “#” in this variable and the resulting number is
“25”.
This rule is applied AFTER applying
digitMapPrefixedDigitRemovalCount
(Step 2) but BEFORE
applying
digitMapPrependedString
(Step 4).
4.
Define the string to insert at the beginning of the dialed number before initiating the call in the
digitMapPrependedString
variable.
For instance, let’s say that you need to dial a special digit, “9”, for all local calls. Dialing “xxx-xxxx”
with a value of “9” would yield “9-xxx-xxxx” as the number with which to initiate the call.
This rule is applied AFTER applying both
digitMapPrefixedDigitRemovalCount
(Step 2) and
digitMapSuffixStringToRemove
(Step 3).
5.
Enable the digit map by setting the
digitMapAllowedEnable
variable to
enable
.
When enabled, this digit map is recognised and accepted only if it is also valid.
Refused Digit Maps
A refused digit map forbids your users to call specific numbers; for instance, you want to accept all 1-8xx
numbers except 1-801. You can create/edit ten refused digit maps for each Mediatrix 1204.
X
To set up refused digit maps:
1.
In the
digitMapMIB
, define the digit map string that is considered invalid when dialed in the
digitMapRefusedDigitMap
variable.
The string must use the syntax described in
. The string format is validated
upon entry. Invalid entries are refused.
Содержание Mediatrix 1204
