Model M - Mediatrix G7 Series
29
LED state
Description
Power LED blinking green 3 cycles per second,
50% duty.
Waiting for DHCP (IPv4 or IPv6) answer or IPv6
router advertisement or PPPoE connection. No Ip
Address configured.
Ready LED OFF, all other LEDs cycling from
right to left, left to right.
The unit tries to download and install a firmware
given by the Network Rescue server.
RESET/DEFAULT Button
The
Reset/Default
button is a switch that can be used to perform a partial or factory reset while
the unit is running.
In other words, the
Reset/Default
button can be used to:
•
Cancel an action that was started.
•
Revert to known factory settings if the Mediatrix unit refuses to work properly for any reason
or the connection to the network is lost.
•
Reconfigure a unit.
The
Reset/Default
button will generate different actions depending on the amount of time the
button is held.
IMPORTANT
:
It is the LED pattern that will indicate the action that is being applied to the unit. The
action will occur more or less rapidly depending on the platform.
media5corp.com
