Media5 Mediatrix 4104, Справочное руководство

Страница: 119 / 466

Services Reference Manual (SIP Version)
Mediatrix 4104 97
When dialing this digit map, this sets the Activation drop-down menu for the line the user is currently
using to disable .
6. Click Submit if you do not need to set other parameters.
Using Call Waiting
The call waiting feature alerts the user if he or she is already on the telephone and a second call happens. A
“beep” (the call waiting tone) is heard and repeated every ten seconds to indicate there is a second incoming
call.

To put the current call on hold:
1. Perform a Flash-Hook by pressing the “Flash” button on your analog telephone.
This puts the call on hold and the second line is automatically connected to your line.
2. Answer the call on the second line.

To switch from one line to the other:
1. Perform a Flash-Hook each time you want to switch between lines.

To terminate the first call before answering the second call:
1. Hang up the telephone.
2. Wait for the telephone to ring.
3. Answer the telephone.
The second call is on the line.
Removing the Call Waiting Tone
You can temporarily activate/deactivate the call waiting tone indicating a call is waiting. This is especially
useful when transmitting faxes. If you are about to send a fax, you can thus deactivate the call waiting tone to
ensure that the fax transmission is not disrupted by an unwanted second call. When the fax transmission is
completed and the line is on-hook, the call waiting tone is automatically reactivated.

To deactivate the call waiting tone:
1. Take the receiver off-hook.
2. Wait for the dial tone.
3. Dial the sequence implemented to deactivate the call waiting tone.
This sequence could be something like *70.
4. Wait for the transfer tone (three “beeps”) followed by the dial tone.
The call waiting tone is disabled.

To re-enable the call waiting tone:
1. Take the receiver off-hook.
2. Replace the receiver on-hook.
The call waiting tone is re-enabled.
Permanently Removing the Call Waiting Tone
You can permanently activate/deactivate the call waiting service.

To activate the call waiting service:
1. Take the receiver off-hook.