Package content
1. Mouse
2. Nano receiver
3. Instruction manual
Installation
Resolution changing
P
ress the CPI button and you can toggle the CPI
between 500 CPI and 1000 CPI.
1. Plug the Nano receiver into a free USB port in
your computer
2. Open the battery cover and install 2 fresh AAA
alkaline battery according polarity marks (bat-
tery is not included).
3. With power switch turn ON the mouse.
4. You can store or take out the Nano receiver
from the Nano receiver storage by push/pull
the Nano receiver.
Mouse functions
CONTRO
2.4G
Instructions manual
MT1062
Hi-Res Wireless Notebook Optical Mouse
EN
Troubleshooting
Check Nano receiver connection
Try to insert Nano Receiver to another USB port
on your computer.
NOTE: To save batteries always turn off the
mouse after fi nished work using power switch
on mouse bottom.
NOTE: Use only alkaline battery. Using other
types and rechargeable batteries could dam-
age mouse electronics.
Buttons
Nano Receiver
CPI Button
Scrolling
wheel
