30
7. Expression
i
l
Use the MAINTAIN program after milk
coming in:
– Once you have pumped at least 20 ml
in total in each of your last three
pumping sessions, OR
– Beginning on day six, whichever of the
two options comes first.
l
Always disconnect the Symphony from
the power source after expression.
Note
l
The program stores the last vacuum
setting in the stimulation phase.
l
For the MAINTAIN program:
Press the “Let-down” button
to
revert from the expression phase to the
stimulation phase if necessary. If milk
has not begun to flow after two
successive stimulation phases, you
should take a break and try again in
15–30 minutes. Also, you could try
breast massage and then pump using
the expression phase.
l
If the pump has been running for
30 minutes without any manipulations
(e.g. adjustment of the vacuum), the
Symphony will automatically switch off.
Info
i
4
Set the comfort vacuum for the
expression phase (see chapter
7.3). The bars on the display show
the vacuum level. The more bars,
the stronger the vacuum.
Press the On/off button to
switch on the breast pump.
The MAINTAIN program will
automatically start with the
stimulation phase after pressing
the On/off button.
7.5 Symphony PLUS card:
Operation MAINTAIN program
1
Содержание Symphony
Страница 3: ...EN 05 41 DA 42 79 NO 80 117 SV 118 155 FI 156 193 PL 194 234 ...
Страница 232: ...232 ...