mectron MICROPIEZO, Руководство по эксплуатации и обслуживанию

Страница: 131 / 262

37
CLEANING AND STERILISATION
8.2.2 Cleaning Method
Clean the surface of the parts in
question using a clean, dry, low-lint
cloth, dampened with a detergent
solution (pH 6-9);
1
pH 6-9 pH 6-9
Dry the parts using a dry, non-abrasive,
low-lint cloth.
2
CAUTION: Do not sterilise the parts in
question. They may stop working and cause
damage to people and/or property.
WARNING: Always switch off the
appliance by pressing and holding the Power
button for 2 seconds and disconnect it from
the mains before carrying out any cleaning.
WARNING: The device and its parts that
cannot be sterilised are not protected against
the penetration of liquids. Do not spray
liquids directly on the surface of the device or
its parts that cannot be sterilised.
CAUTION: Do not use running water to
clean the parts in question.
CAUTION: Do not soak these parts in
liquid and/or various kinds of solutions.