mectron compact piezo P2K, Руководство по эксплуатации и обслуживанию

Страница: 39 / 52

33
TECHNICAL DATA
9.1 Electromagnetic Compatibility IEC/EN 60601-1-2
WARNING: Contraindications.
Interference with other equipment
Even if compliant with standard IEC/EN
60601-1-2, COMPACT PIEZO P2K may
interfere with other devices in the vicinity.
WARNING: Portable and mobile radio
communication equipment may influence the
correct operation of the appliance.
WARNING: Contraindications.
Interference from other equipment
An electrosurgical scalpel or other
electrosurgical units positioned near the
COMPACT PIEZO P2K appliance may interfere
with the correct operation of the appliance
itself.
WARNING: The appliance requires
particular EMC precautions and must be
installed and put into service according to the
EMC information provided in this chapter.
WARNING: The use of cables and
accessories not supplied by MECTRON may
adversely affect the eMC performances.
9.1.1 Guide and Manufacturer’s Declaration - Electromagnetic
Emissions
COMPACT PIeZO P2K is designed to operate in the electromagnetic environment specified
below. The purchaser or user of COMPACT PIEZO P2K should ensure that it is used in such an
environment.
Emissions Test Compliance Electromagnetic Environment Guidance
RF Emissions
CISPR 11
Group 1
COMPACT PIEZO P2K uses RF energy only
for its internal operation. Therefore, its RF
emissions are very low and probably do
not cause any interference with nearby
electronic devices.
RF Emissions
CISPR 11
Class B
COMPACT PIEZO P2K is suitable for use in all
buildings, including domestic buildings, and
those directly connected to the public low-
voltage power supply network that supplies
buildings used for domestic purposes.
Harmonic emissions
IEC 61000-3-2
Class A
emissions of fluctuations
voltage/flicker
IEC 61000-3-3
Compliant