RTU Modbus interface : MPNC006 Mect srl
3
ME7084_05 07/21
1
Introduction
To ensure a quick installation of the device please follow carefully the information
given in this manual.
1.1
Staff qualification
Products described here are to be used exclusively by personnel with experience in
programming PLCs, or technician specialized in the use of electrical device for
automation. MECT S.r.l. declines any responsibility for malfunctions or damages
caused by improper use of MECT devices, due to the non-compliance with
information in this manual. In MECT S.r.l there is an help desk service.
1.2
Symbols
Danger
Follow these advices to avoid people injury.
Warning
Follow these advices to protect the device.
Caution
Follow this advice to have a more effective performance.
ESD
(Electrostatic discharge)
Danger: possibility of components damage due to electrostatic
discharge
Note
Steps to follow for a correct installation
Additional informations
1.3
Nomenclature
Modbus RTU interface: MPNC006
Terminals:
MPNC020; MPNC030; MPNC035
Operator Panel: TP1070
System:
MPNC006 with terminals
TBUS:
Internal bus for communication between MPNC006
and terminals
