manualshive.com logo in svg

Meco Aussie Vantage 6212S00T91 Use, Руководство пользователя

Поделиться
Скачать
Meco Aussie Vantage 6212S00T91 Use Скачать руководство пользователя страница 1

For Outdoor Household Use Only. Not for Commercial Use.

Need Help? Need to Register Your Grill? Looking for Aussie Parts & Accessories?

Visit us online at www.AussieGrills.com Or call Aussie Customer Service at 1-800-251-7558

• Failure to follow these intructions could result in 

fire or explosion which could cause death, serious 
personal injury, or property damage.

• Read and follow instructions carefully before      

assembly or use.

• Do not use this product for any other purpose than 

which it is intended.

• These instructions must be kept with the user. 

SAVE THESE INSTRUCTIONS.

If you smell gas:

1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. Open lid.
4. If odor continues, keep away from the appli-

ance and immediately call your gas supplier or 
your fire department.

WARNING

DA N G E R

!

!

LP Gas Grill Assembly and Use Manual

6212S00T91

• Do not store or use gasoline or other flammable 

vapors and liquids in the vicinity of this or any 
other appliance.

• An LP cylinder not connected for use shall not be 

stored in the vicinity of this or any other appliance.

WARNING

!

6512S0DT91

Содержание Aussie Vantage 6212S00T91 Use





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды