Page 8
3084ES Speed Level
TM
- Operator’s Manual
August 2020
Secton 4 - Hazards
Tip-over Hazards
ART_3065
DO NOT OVERLOAD
DO NOT exceed the maximum platform capacity (see Specifications). The
weight of options and accessories will reduce the rated platform capacity
and must be factored into the total platform load. Refer to the decals on the
options.
DO NOT elevate the platform when the machine is on a surface that is soft,
non-planar, or exceeds the leveling range of the machine.
The tilt alarm will sound when the machine is off level. If the alarm sounds
when the platform is lowered, DO NOT attempt to elevate the platform.
Carefully lower, re-level the machine, or move the machine to a surface within
the leveling range.
ART_3064
DO NOT ELEVATE
OR DRIVE ELEVATED
ON A SURFACE
THAT EXCEEDS THE
LEVELING RANGE
If the alarm sounds when the platform is raised, use extreme caution to lower
the platform.
Driving in stowed position:
Use extreme care and slow speeds when driving
across uneven terrain, debris, unstable or slippery surfaces, and near holes or
drop-offs.
Driving with the platform elevated:
DO NOT drive on or near uneven terrain,
unstable surfaces or other hazardous conditions.
ART_3063
DO NOT DRIVE
ELEVATED ON
IRREGULAR OR
UNSTABLE SURFACE
DO NOT push off or pull toward any object outside the platform.
Maxmum Allowable Sde Force
ANSI and CSA
CE and AUS
250 lbs (1,100 N)
90 lbs (400 N)
DO NOT elevate the platform when wind speeds are in excess of 28 m.p.h.
(12.5 m/s). If these wind speeds occur when the platform is elevated, carefully
lower and discontinue operation.
ART_3069
DO NOT PUSH OR PULL
OBJECTS OUTSIDE
PLATFORM
DO NOT increase the surface area of the platform (i.e. cover the rails with
tarp or plywood). Increased surface area exposed to the wind will decrease
machine stability.
DO NOT attach overhanging loads or use the machine as a crane.
DO NOT transport tools and materials unless they are evenly distributed and
can be safely handled by personnel in the platform. Secure all tools and loose
materials to prevent injury to personnel below the platform.
