Measurement Computing miniLAB 1008, Руководство пользователя, Страница: 31 / 78

Chapter 3
Getting Started with TracerDAQ
TracerDAQ is a set of virtual instruments that you can use to acquire and display analog
data from the miniLAB 1008.
This chapter details how you acquire data from the miniLAB 1008, and plot the data on
the TracerDAQ strip chart. The following exercise helps get you started with the
TracerDAQ strip chart by showing you how to:
ƒ Launch TracerDAQ from Insta Cal
ƒ Select the hardware and channels to use as your data source
ƒ Log the data to a file
ƒ
Plot the data on TracerDAQ's strip chart
Launching TracerDAQ from Insta Cal
Measurement Computing’s Insta Cal program shares configuration information with
TracerDAQ. To start TracerDAQ from Insta Cal, follow these steps.
1. Click on Start >
Programs
>
Measurement Computing
>
InstaCal
to launch the
Insta Cal application.
The Insta Cal main form opens.
3-1