Meade MAX-ACF, Инструкция по эксплуатации

Страница: 20 / 60

20
27
ATTACH OPTICAL TUBE TO THE DEC SADDLE
Turn the OTA lock knobs on the Dec Assembly so that
there is NO a gap.
Looking at or near the Sun will cause irreversible damage to your eye. Do not point this telescope at or near the
Sun. Do not look through the telescope as it is moving.
no gap
25
Screw the safety cap on the end of the shaft after the
counterweights are attached.
CAUTION: IF THE COUNTERWEIGHT(S) EVER SLIP,
THE SAFETY CAP PREVENTS THE COUNTERWEIGHT
FROM SLIDING ENTIRELY OFF THE SHAFT. ALWAYS
LEAVE THE SAFETY CAP IN PLACE WHEN THERE ARE
COUNTERWEIGHTS ON THE SHAFT.
ATTACH LOW LATITUDE COUNTERWEIGHTS
(ONLY IF USING A TRIPOD—OPTIONAL ACCESSORY)
If your observing site is within 20° of the equator, you
must attach the optional counterweight kit. See page 4
to see overview of the assembly.
See the assembly sheet that is included with the Low
Latitude Counterweight kit for assembly instructions.
24
B
Put on adjustable counterweights (three for 20 inch
models, two for 16 inch models). The weights can be
attached more easily if you make this a two person job.
One person holds weight and holds in button. Other per-
son pushes the weight up the shaft; slide up to within
one inch of the end of travel. Push counterweights up
against one another.
26