MDT SCN-BWM55.02, Техническое руководство

Страница: 45 / 61

Technical Manual
Motion Detector/Automatic Switch 55/63
Series .02
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
45
45
4.5.2.3 Basic function – Dimming

Single-button function
The following figure shows the available setting:
Figure 28: Setting – Single-button function: Dimming
With the single button function "Dimming", 3 communication objects appear for this button. On the
one hand, the function for the short button press, the "Dimming on/off" object, and on the other
hand, the function for the long button press, the "Dimming relative" object.
The direction (brighter/darker) is reversed depending on the "Status for toggle" communication
object.
The dimming function is a start-stop dimming, i.e., as soon as the dimming function becomes active
with "long button", a "brighter" or "darker" command is assigned until the button is released. After
release, a stop telegram is sent which ends the dimming process.
The following table shows the available communication objects:
Number
Name/Object Function Length Usage
131 Button left –
Dimming On/Off
1 Bit Switching command for the dimming function
132 Button left –
Dimming relative
4 Bit Command for relative dimming
133 Button left –
Status for toggle
1 Bit
Receipt of the status with current information
about the status of the actuator to be controlled
Table 35: Communication objects – Single-button function: Dimming