Technical Manual
LED-Indicator
SCN-LED55.01/SCN-GLED1x.01
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Phone: +49-2263-
880 • Fax: +49-2263-4588 • [email protected] • www.mdt.de
22
22
4.4 Logic setting
The following picture shows the available logic settings:
Figure 15: Logic settings
4.4.1 Behavior at bus power reset
The parameter “Behavior at bus power reset” is valid for all 8 logic blocks and defines the requesting
of the external logic objects. The following settings are available:
•
no read external logical objects
The external logic objects are not read at a bus power reset and as unconfirmed, so with the
value "0" assumed.
•
read external logical objects
The external logic objects are read at a bus power reset and the current value is taken over.
