MDT Technologies BE-GT20S.01, Техническое руководство

Страница: 54 / 90

Technical Manual
Glass Push Button II Smart & Push Button Smart 86
MDT technologies GmbH, Geschäftsbereich Gebäudeautomation
Phone: +49-2263-880
•
Fax: +49-2263-4588
•
E-Mail: knx@mdt.de
•
www.mdt.de
54
54
Left/Right push button:
Percent value,
Brightness value…. any value according to set data point
type
Only for two-button function .
Setting the values to be sent for
the two buttons
Percent value,
Brightness value…. any value according to set data point
type
Only for single-button function .
Setting the value to be sent for
the button
Individual time for long
push of button not aktiv
0,1 s – 30,0 s
Setting from when a long key
press is detected
Display of function
short/long

Display action of short push
button

Display action of long push button
Setting which key should be
presented on the display as the
status
Table 42: Settings – Switch/Send values short/long (with 2 objects)
Principle of operation :
In case of the two-button function, different values for the left and the right button can be sent (for
the short as well as for the long button). With the single-button function only one value can be sent
for the short as well as for the long button. The datapoint type can be set separately for the short
and long button.
Two different functions can be executed here but only one of the functions can be presented on the
display. The parameter "
Display of function short/long " defines which of the two functions this is.
The following table shows the available communication objects:
Number Name Length Usage
0 Push Button 1 short
Push Buttons 1/2 short–
Forcible control, Percent value… Sending the value for the short button.
DPT depending on the parameter setting
1 Push Button 1 short
Push Buttons 1/2 short –
Value for toggle 1 Bit Receive the status for the short button.
Only with the "Toggle" function
1 Push Button 1 short
Push Buttons 1/2 short –
State of percent value…. Receive the status for the short button.
DPT depending on the parameter setting
No status possible for 2Bit, scene, RGB
2 Push Button 1 long
Push Buttons 1/2 long –
Forcible control, Percent value… 1 Bit Sending the value for the long button.
DPT depending on the parameter setting
3 Push Button 1 long
Push Buttons 1/2 long –
Value for toggle Receive the status for the long button.
Only with the "Toggle" function
3 Push Button 1 long
Push Buttons 1/2 long –
State of percent value…. Receive the status for the long button.
DPT depending on the parameter setting.
No status possible for 2Bit, scene, RGB
Table 43: Communication objects – Switch/send values short/long (with 2 objects)