12
cylinder rod (2x)
cylinder base (2x)
grapple arm
pivot pin (2x)
MAINTENANCE
Regular maintenance is the key to long equipment life and safe operation. Read and follow all
safety precautions before performing any maintenance or troubleshooting on this equipment.
•
Keep area around cylinders free of dirt and debris. Build-up of dirt and debris will
restrict movement of the cylinders which may cause component failure.
•
Check all nuts and bolts for tightness.
•
Replace any missing bolts or nuts with MDS approved replacement parts.
•
Check hydraulic system for hydraulic oil leaks.
•
Visually inspect the attachment(s) for worn parts, cracked welds, bent or broken parts,
and have repaired as necessary.
•
IMPORTANT: When replacing parts, use only MDS Manufacturing approved parts. MDS
Manufacturing will not claim responsibility for use of unapproved parts or accessories
and/or other damages as a result of their use.
•
Lubricate all grease fittings at a minimum of every 40 hours of use. (see drawing below)
