68
LEDR Series I/O Guide
MDS 05-3627A01, Rev. D
Usage:
log [subcommand] [<argument>]
Subcommands:
view [critical|major|minor|inform]
clear
send [filename] [hostIP]
This command is used to display and manage the event log file. Without
a subcommand, the complete log file will be displayed one page at a
time. If you are interested in less than the full report, use one of the fol-
lowing subcommands:
view
—Sets or displays the types of events to be displayed.
clear
—Resets the event log and purges all events from memory.
send
—Uploads the event log information to an IP address using TFTP
protocol in a way similar to the
config
on
NOTE:
When setting up a link for the first time, after powering up the
unit, you may want to clear the event log. After logging in as
SUPER
, enter the command
log clear
.
login
Log into the radio’s
CONSOLE
port
Usage:
login [username]
This command allows access to configuration and diagnostics informa-
tion as allowed by the radio system administrator. You can shorten the
login sequence by following the
login
command with the user/account
name (
username)
.
Example:
LEDR> login
Returns:
Username>
Type:
fieldserv
(or appropriate user name)
Returns:
Password>
Type: (password)
NOTE:
User names and passwords must not exceed eight characters
and are case sensitive. Do not use punctuation marks.
See
user
for more information on user access
levels.
