MDS entraNET 2400, Инструкция по установке и эксплуатации

Страница: 176 / 208

168 MDS entraNET System Guide MDS 05-4055A01, Rev. C
7.1.3 Using Logged Operation Events
(See Event Log Menu on Page 81)
The transceiver microprocessor monitors many operational parameters
and logs them as various classes of “events.” If the event is one that
affects performance, it is an “alarmed” event. There are also normal or
routine events such as those marking the restarting of the system, imple-
mentation of parameter changes, and external access to the entraNET
MS. Informational events are stored in temporary (RAM) memory that
is lost in the absence of primary power, and alarms are stored in perma-
nent memory (flash memory) until cleared by your request.
Table 3-3
summarizes these classifications.
These events are stored in the transceiver Event Log, and can be a valu-
able aid in troubleshooting radio problems or detecting attempts to
breach network security.
Table 7-5 lists all of the transceiver event codes and provides a brief
description of their meaning.
Table 7-4. Event Classifications
Level Description or Impact Storage
Informational Normal operating activities Flash
Memory
Minor Does not affect radio operation RAM
Major Degraded radio performance but
still capable of operation RAM
Critical Prevents the radio from
operating RAM
Table 7-5. MDS entraNET Event Codes
Index Event Type Event Name
String Clear String Set String
0 EVENT_IPADDR IP Address Valid Invalid
1 EVENT_IPMASK IP Mask Valid Invalid
2 EVENT_MACADDR MAC Address Valid Invalid
3 EVENT_SYSTEM_ERROR System Error Cleared Please
Reboot
4 EVENT_BRIDGE Network
Interface OK Error
5 EVENT_FREQ_CAL Frequency Calibrated Not
Calibrated
6 EVENT_POWER_CAL Power Calibrated Not
Calibrated
7 EVENT_FLASH_TEST Flash Test Passed Failed
8 EVENT_RSSI_CAL RSSI Calibrated Not
Calibrated
9 EVENT_RAD_NO_NETWORK_
ADDRESS Net Address Programmed Not
Programmed