MDC XT17HRT 2022, Руководство пользователя

Страница: 68 / 112

www.marketdirect.com.au
I
Ph: 1300 494 494
I
©Copyright
I P a g e | 66
Charging from Tow Vehicle
Symptom Possible Cause Remedy
No charge Alternator light not
showing on DC to DC Tripped breaker Reset circuit breaker CB5 in Fig. 1 &
Fig. 3
Tripped breaker in car circuit Check car circuit breaker/fuse Fig. 6
No charge, alternator, and solar light
both on Trigger wire for DC to DC unit not
activated Connect trigger wire for DC to DC to
accessory power from car via trailer
plug. Fig. 5
No charge DC to DC alternator lit Tripped breaker Reset circuit breaker CB4 Fig. 1 &
Fig. 3
Trigger wire for DC to DC unit not
activated for smart alternator Connect trigger wire for DC to DC to
accessory power from car via trailer
plug. Fig. 5
Charging from Mains Power
Symptom Possible Cause Remedy
No power to charger Mains power not connected Connect mains power
Charger not plugged in Plug in mains charger
Charger not turned on Turn on charger
RCD tripped Reset RCD Fig 1
No charge with charger on Tripped circuit breaker Reset circuit breaker CB3 Fig.1 &
Fig. 3
Incorrect charger setting Set charger to correct battery type
and power setting (AGM for
standard batteries)
Battery voltage too low (less than 6
volts)
Change charger setting to “Supply”
until battery voltage reads minimum
of 6 volts then choose setting
“recondition” if this function is
available. Choose “AGM” if not
available.
If error code appears on the charger display refer to the Projecta user manual.