MDC XT16-HR East West, Руководство пользователя

Страница: 70 / 113

www.marketdirect.com.au
I
Ph: 1300 494 494
I
©Copyright
I P a g e | 68
Solar Charging
Symptom Possible Cause Remedy
No solar power DC to DC solar light
not showing Tripped circuit breaker Reset circuit breaker CB6 in Fig. 1 &
Fig. 3
DC to DC overloaded Reset DC to DC by disconnecting
from battery and solar input. See
Projector user guide.
No solar power Dc to DC solar light
showing Tripped circuit breaker Reset circuit breaker CB4 in Fig. 1 &
Fig. 3
Weak solar charging (low voltage
output) Weak solar input due to shade Move to sunnier area
Weak solar due to dirty panels Clean panels
Incorrect setting Ensure DC to DC is set to correct
battery type
Solar charging not meeting demands Power demands exceeding
designed solar output
Add additional solar panels
Reduce load
NOTES*
Expectations of a 300 watt solar charging system need to be reasonable. Running two fridges without adding
additional solar and following best practice with pre-cooling and packing will greatly reduce battery life and the ability
of the solar panels to keep up with power needs.
Using inverters will very quickly diminish battery capacity.
Charging from Tow Vehicle
Symptom Possible Cause Remedy
No charge Alternator light not
showing on DC to DC Tripped breaker Reset circuit breaker CB5 in Fig. 1 &
Fig. 3
Tripped breaker in car circuit Check car circuit breaker/fuse Fig. 6
No charge, alternator, and solar light
both on Trigger wire for DC to DC unit not
activated Connect trigger wire for DC to DC to
accessory power from car via trailer
plug. Fig. 5
No charge DC to DC alternator lit Tripped breaker Reset circuit breaker CB4 Fig. 1 &
Fig. 3
Trigger wire for DC to DC unit not
activated for smart alternator Connect trigger wire for DC to DC to
accessory power from car via trailer
plug. Fig. 5