28
1300 4X4 4X4
Connecting the Gas
Your caravan is fitted with plumbed gas with the regulator and gas bottle placement at the front of the trailer. Always
ensure gas bottles are serviceable and within the 10-year service life. This information is stamped on the bottle base.
Once you connect your gas bottle you can connect the kitchen gas hose to the bayonet connection provided. (Fig:5)
Fig:5
Once the bayonet is secure, ensure all controls on the stove are in the “Off” position and then turn on the gas bottle
valve. If your kitchen stove is fitted with electric ignition, plug the connector into the 12v socket beside the kitchen and
turn on the required burner whilst pressing the ignition button. When the burner ignites hold the button down for 5
seconds then release.
NOTE: It will take up to a minute or so for the gas to purge the line and flow through the
burners.
Protecting from Mould
Mould is very difficult to clean once a porous surface
is affected. There are several ways you can prevent
the occurrence of mould on your caravan.
Never leave your caravan packed away with a wet
interior. If you must leave a campsite with wet canvas
or a damp interior, be sure to open and dry out your
caravan thoroughly at the very first opportunity when
you get home. Mould can develop in just a couple of
days so don’t take the risk.
When packing up dry, it is important to check under the mattress that there is no build-up of condensation overnight.
Body heat on a mattress can create enough temperature difference between the interior and exterior for moisture to
form under it. If left unchecked this can cause mould when your caravan is stored.
Содержание XT12-DB
Страница 27: ...26 1300 4X4 4X4 12 Volt Wiring Diagram ...
Страница 32: ...31 1300 4X4 4X4 Trouble Shooting Electrical ...
Страница 39: ...38 1300 4X4 4X4 Maintenance Schedule ...