MDC XT11 2020 страница 32 Скачать руководство пользователя | Manualshive

Страница: 32 / 45

background image

31

1300 4X4 4X4

Stone Protection

There are proprietary devices available that assist in protecting your trailer from stones thrown up by the tow vehicle.

Rock Tamer and Stone Stomper are two of the most commonly used.

Modiﬁcations

Chassis, drawbar and suspension

Drilling, welding, cutting or modifying these items is dangerous and, in some instances, may be illegal. MDC products
are designed by engineers to meet strict standards. Australia has strict compliance guidelines and engineering
requirements. Unauthorised modifications without engineering accreditation may render your trailer illegal and
dangerous. Always consult the manufacturer prior to engaging in any modification in these areas.

Body

MDC campers and caravans have wires both 240v and 12v as well as plumbing routed through the body frames in our
products. Never modify any part of the body without consulting with the manufacturer on the location of these services.

Electrical

Australian Design Rules and compliance for caravan electrical systems apply to this product. Any 240-volt additions or
modifications must only be undertaken by a suitably qualified electrician and a new compliance certificate supplied by
the person doing the work.

Gas System

The gas installation on your MDC product has been designed and tested to comply with all applicable regulations.
Modification to the gas system may only be undertaken by a qualified gas fitter and meet RV requirements. Any
modifications will result in the original manufacturer gas certification being null and void and will require re-certification
by the person doing the modifications.

Trouble Shooting

Electrical

«
...
30
31
32
33
34
...
»

Содержание XT11 2020














































Отзывы:

Нет отзывов

Похожие инструкции для XT11 2020

Stirling LX MK3

Бренд: Ezytrail Страницы: 62

Бренд: Hobby Страницы: 189

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды