MDC XT 12E, Руководство пользователя

Страница: 73 / 114

www.marketdirect.com.au
I
Ph: 1300 494 494
I
P a g e | 73
Charging from Mains Power
Symptom Possible Cause Remedy
No power to charger Mains power not connected Connect mains power
Charger not plugged in Plug in mains charger
Charger not turned on Turn on charger
RCD tripped Reset RCD Fig 1
No charge with charger on Tripped circuit breaker Reset circuit breaker CB3 Fig.1 &
Fig. 3
Incorrect charger setting Set charger to correct battery type
and power setting (AGM for
standard batteries)
Battery voltage too low (less than 6
volts) Change charger setting to “Supply”
until battery voltage reads minimum
of 6 volts then choose setting
“recondition” if this function is
available. Choose “AGM” if not
available.
If error code appears on the charger display refer to the Projecta user manual.
Control Panel & Accessories
Symptom Possible Cause Remedy
Control panel won’t switch on Flat batteries Charge batteries
Tripped circuit breaker Reset circuit breaker CB1 Fig.1 &
Fig. 2
Accessory circuit not working Tripped circuit breaker Reset circuit breaker above circuit
switch by pushing in. Listen for click.
RV Electronics tank gauge not
working Flat battery in face panel Remove face cover and replace
battery (see RV electronics manual)
Inverter not switching on Tripped circuit breaker Reset circuit breaker CB2 Fig. 1 &
Fig. 2