![background image](http://html1.mh-extra.com/html/mdc/robson-xtt/robson-xtt_owners-manual_1757193042.webp)
www.mdcusa.com
Ph: 833 632 8721
42
Ball Bearing Slides
To lubricate and protect from corrosion the ball bearing slides should be lubricated with a small amount of general
purpose grease every 6 months.
Plumbing
Hot Water System
The manufacturers Operation Manual States:
Safety symbols and signal words
This
is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.
DANGER!
indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING!
indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION!
indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE!
is
used to address practices not related to physical injury.
Other important information or tips
Safety Behavior and practices
Ensuring a safe operating environment
•
DANGER!
Suffocation through exhaust gases. To ensure dissipation of exhaust gases, operate the
appliance outdoors only.
-
Never use in enclosed spaces or tents or breathe in the exhaust gases.
-
If installing an awning, make sure that the exhaust system terminates outdoors.
-
If you park the RV in an enclosed space, such as a garage or repair shop:
•
You must block the fuel supply.
•
You must switch the appliance off at the control panel.
•
Use the appliance only with a functioning LP gas and carbon monoxide detector installed in the RV. For
installation, operation and function test follow the manufacturer’s guidelines.
•
Keep the air inlet and exhaust outlet free of obstructions in order to ensure clean combustion.
•
Do not place articles on or against the appliance. Do not lean any objects against the water heater’s access door
or place any foreign objects within 2 feet (61 cm) of the access door.
•
Do not use or store flammable materials near the appliance.
•
Do not spray aerosols in the vicinity of the appliance while it is in operation.
•
Do not modify the appliance
Responsibilities of the operator
•
Avoid possible serious health issues caused by electromagnetic radiation. All persons with a pacemaker are
prohibited from opening the access door and maintaining the appliance during operation.
•
The operator is responsible for the water filled into the appliance and its quality.
•
The use of upright gas cylinders from which gas is taken in the gas phase is mandatory for the operation of gas
regulators, gas equipment and gas systems. Gas cylinders from which gas is taken in the liquid phase (e. g.
for forklifts) must not be used, since this would result in damage to the gas system.
•
For your own safety it is absolutely necessary to have the complete gas installation regularly checked by an
expert (at least every 2 years). The vehicle owner is always responsible for arranging the gas inspection.
Содержание ROBSON XTT
