McQuay IM-WM1W-0704, Руководство по установке, Страница: 8 / 84

1-2
CONTENTS
- Outline and Dimensions page i
- Notice page i-iv
- Safety Precautions page 2
- Installation Diagram page 3
- Installation of the Indoor Unit page 3
- Electrical Wiring Connection page 4
- Indicator Lights page 6
- Air Conditioner Unit Operation page 7
- Oparating Range page 7
- Optional : Electrostatic Filter page 8
- Service and Maintenance page 9
- Troubleshooting page 10
Before installing the air conditioner unit, please read the following safety precautions carefully.
SAFETY PRECAUTIONS
!
Warning
• Installation and maintenance should be performed by qualified persons who are familiar with local code and
regulation, and experienced with this type of appliance.
• All field wiring must be installed in accordance with the national wiring regulation.
• Ensure that the rated voltage of the unit corresponds to that of the name plate before commencing wiring work
according to the wiring diagram.
• The unit must be GROUNDED to prevent possible hazard due to insulation failure.
• All electrical wiring must not touch the refrigerant piping, compressor or any moving parts of the fan motors.
• Confirm that the unit has been switched OFF before installing or servicing the unit.
!
Caution
Please take note of the following important points when installing.
• Do not install the unit where leakage of flammable gas may occur.
If gas leaks and accumulates at the surrounding of the unit, it may cause fire ignition.
• Ensure that the drainage piping is connected properly.
If the drainage piping is not connected properly, it may cause water leakage which will dampen the
furniture.
• Do not overcharge the unit.
This unit is factory pre-charged. Overcharge will cause over-current or damage to the compressor.
• Ensure that the units panel is closed after service or installation.
Unsecured panels will cause the unit to operate noisily.
IMPORTANT
DO NOT INSTALL OR USE THE AIR CONDITIONER UNIT IN A LAUNDRY ROOM.