McNeilus Zero Radius ZR 12 ft. Extended Reach, Руководство оператора

Страница: 95 / 118

83
© 2010 McNeilus Truck and Manufacturing, Inc.
Zero Radius Side Loader
Preventive Maintenance
4.2 Disengaging the Tailgate Prop
After completing the maintenance procedures on the body
that require the tailgate to be propped, the following procedure
must be followed to disengage the prop and close the tailgate.
1. Remove the Lockout/Tagout procedure from the refuse
vehicle. If your company does not have a Lockout/
Tagout procedure, follow OSHA 1910.147 and 1910.146
Confined Space as appropriate.
2. Open the tailgate as needed to provide the necessary
clearance to disengage the prop from the pocket in the
body compartment.
3. Disable the refuse vehicle functions.
WARNING
Packer must be disabled by the following
steps before proceeding.
1. Place transmission in NEUTRAL.
2. Apply chassis parking brake.
3. Shut engine OFF.
4. Remove chassis ignition key and maintain
in personal possession.
5. Turn chassis BATTERY switch OFF.
Failure to disable the Packer may result in
serious personal injury or death.
4. Standing behind the tailgate, remove the prop from the
pocket and swing the prop ( Figure 45 , Item 1) away from
the chassis frame to the STORED position and install the
retaining pin ( Figure 45, Item 2).