McNeilus Zero Radius ZR 12 ft. Extended Reach, Руководство оператора

Страница: 65 / 118

53
© 2010 McNeilus Truck and Manufacturing, Inc.
Zero Radius Side Loader
Operation
3.0 Operating Procedures
Be sure all non-operator personnel are at
least 20 feet (6 meters) away from all areas
of the Packer.
Serious personal injury or death may occur.
WARNING
WARNING
Do not leave the truck unattended until the
parking brake has been securely set and all
reasonable precautions have been taken to
prevent the movement of the truck. The
operator must chock the truck wheels
anytime he is away from the vehicle for an
extended period of time. Wheel chocks are
available for purchase from McNeilus Truck
and Manufacturing, Inc. by calling
888-686-7278.
Failure to comply may result in serious
personal injury or death or damage to
equipment.
NOTE
Turn the pump ON and idle the truck for a
minimum of five minutes before operating
the hydraulic functions when the air
temperature is 50° F (10° C) or below.
3.1 Start-Up Procedure
Before starting the vehicle, make certain that:
1.
BATTERY switch is ON.
2. Daily checks have been completed and verified.
3.2 Warm-Up Procedure
At start-up of the equipment each morning, it is important to
cycle through each of the main hydraulic circuits to be certain
each circuit is functioning properly. Cycling through each
operation also helps ensure that the hydraulic fluid is up to
operating temperature and is present throughout the system.