McNeilus Zero Radius ZR 12 ft. Extended Reach, Руководство оператора

Страница: 47 / 118

35
© 2010 McNeilus Truck and Manufacturing, Inc.
Zero Radius Side Loader
Operation
1.2 Remote Control Box Buttons
(Optional)
The Arm Assembly functions can also be operated from
the remote control box when the operator is outside the
cab (Figure 13). The remote control box is normally located
inside the curb side door of the chassis cab. The OUTSIDE
CONTROL button in the cab must be activated to enable the
use of the remote control box.
NOTE
The LED lights on the remote control box
buttons work the same way as the buttons
on the control box in the cab.
No. Position Normal Use or Reading
1
AUTO PACKING
Button
Press this button to start the
auto packing cycle.
2
GRABBER OPEN
Button
Press and hold button to
open grabber fingers.
3
EJECTOR PANEL
RETRACT Button
Press this button to retract
the ejector panel to the
HOME position.
No. Position Normal Use or Reading
4
EJECTOR PANEL
EXTEND Button
Press this button to extend
the ejector panel. Pressing
the button will stop the auto
pack mode if active.
5
GRABBER CLOSE
Button
Press and hold button to
close grabber fingers.
6 E-STOP Button
Disables all Hydraulic and
Electric functions.
7 ARM DOWN Button
Press and hold button to
lower arm.
8
TAILGATE CLOSE
Button
Press and hold button to
close the tailgate. You must
also press and hold the
ACTIVATE button.
9
TAILGATE OPEN
Button
Press and hold button to
open the tailgate. You must
also press and hold the
ACTIVATE button.
10 ARM UP Button
Press and hold button to raise
arm.
11 ACTIVATE Button
Press and hold the ACTIVATE
button to enable the Tailgate
functions.
12 ARM ON Button
Press to enable the Arm
functions.