iLive | ITB174
Quickstart Guide
For FAQ, visit the support section at www.ilive.net or call customer support at: 1-888-999-4215
Power & Input Modes
Using the ITB174 Sound Bar
Bluetooth
Connecting your sound bar wirelessly using Bluetooth
Plug the small end of the power cord into the DC Input on the back
of the speaker, and the large plug into a standard wall outlet.
Indicator Lights
Power
StatuS
IndIcator
Power Off
Red Light
Line In Mode
Green Light
Optical Mode
Amber Light
Aux In Mode
White Light
Bluetooth Pairing
Flashing Blue Light
Bluetooth Connected
Blue Light
Pairing a Bluetooth device for the First time
1. Power on the unit by pressing the
Power
button.
2. Press the
button on the remote to switch to Bluetooth Mode, indicated by a slowly
flashing blue light.
3. Press and hold the
Pair
button on the side of the unit.
The pairing indicator will flash blue quickly. When pairing, remain within 3 feet
of the unit.
4. Using the native controls on your Bluetooth device, select the
ItB174
in your Bluetooth
settings to pair.
If your device requests a password, enter the default password
0 0 0 0
.
Refer to the user’s manual for your specific device for instructions on pairing and connecting
Bluetooth devices.
5. When successfully paired and connected, a beep will issue from the unit and the
Pairing
Indicator
will display a solid blue light.
After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a
reset of the device. If your device should become unpaired or you find it is unable to connect, repeat
the above steps.
