McLaren SUPER SERIES, Руководство пользователя

Страница: 70 / 268

Driving Controls
Starting and Driving
2.14
When the system has been manually
switched off, both the front and rear sensors
will still switch on when reverse gear is
selected and remain on until drive or neutral
is selected again.
If a fault is detected the system will be
disabled and message will appear in the
Driver Display, the parking sensor button
light will flash. If the sensors are obscured by
dirt, ice or snow, clean them. If the problem
persists, contact your McLaren retailer.
Rear view camera (RVC)
The rear view camera (RVC) is mounted in
the centre of the rear bumper. The live video
feed is displayed on the Driver Display when
the function is active.
NOTE: If the video feed is blurred or
unclear, carefully clean the lens with
water and a soft cloth.
NOTE: If the Driver Display is in Slim
Display Mode the RVC will be displayed
on the Central Display.
NOTE: Slim Display Mode will not be
available whilst the RVC is active.
A coloured grid is overlaid onto the live video
feed as a guide to the proximity of visible
objects to the rear of the vehicle.
Each coloured box starts at the rear of the
vehicle and extends 25 cm (10 in) beyond
the widest point of the vehicle and extends
back, away from the vehicle.
The red static box extends back 40 cm (1 ft 6
in) from the rear of the vehicle.
The green static box extends back 2 m (6 ft 7
in) from the rear of the vehicle, with an
additional line at 1 m (3 ft 4 in).
p14.book Page 14 Tuesday, October 24, 2017 11:15 AM