McLaren SUPER SERIES, Руководство пользователя

Страница: 164 / 268

Central Display
Navigation
4.36
Navigation
Overview
The navigation system uses signals
from Global Positioning System (GPS)
satellites together with information from
vehicle sensors and map data stored on the
McLaren Infotainment System (MIS) to
determine the precise location of the
vehicle.
Using this data, the system is able to create
the optimum route to your destination,
taking into account any journey preferences
you may have set.
To set your preferences, see Navigation,
page 4.20.
Creation of a specific route is achieved by
using the on-screen menus and the MIS
controls, to make your selections. This
results in your route being highlighted on
the map.
Once you have started a journey, turn
information is displayed on the Central
Display, supplemented by voice guidance if
required, at appropriate points during the
journey.
When a significant diversion is made from a
planned route, the system will automatically
recalculate an alternative route to the
destination. Safety
WARNING: For your safety, ensure
that you do not become distracted
from the task of driving, through
use of the navigation system.
Read and adhere to the safety
message which appears the first
time you enter the navigation
system after switching on the
ignition.
National road traffic laws and traffic signals
must always be obeyed.
Always remember that the purpose of the
navigation system is to help in determining
the optimum route, it must never be
considered as an aid when visibility is
reduced.
GPS signals may be interrupted when
travelling through tunnels or other
situations where GPS signal could be
blocked. Navigation will continue on the
route until GPS signal is regained.
The GPS signal strength is indicated by
the icon in the status bar.
p14.book Page 36 Tuesday, October 24, 2017 11:15 AM